Courses & workshops - ingeniare.net

Go to content

Courses & workshops

Technical engineering courses and workshops to share and/or expand knowledge on specific topics
Ingeniare will support you in the transfer of knowledge or perspectives and will provide you with interactive sessions that encourage the creation, exchange and dissemination of knowledge
WORKSHOP OF PIPING SYSTEM DESIGN APPLYING ASME "American Society of Mechanical Engineers" STANDARDS
GENERAL OBJECTIVE
Ensure that participants acquire the necessary skills for the Design, Selection, Construction, Operation and Maintenance of Piping Systems. This is done so that participants can carry out the aforementioned operations in an optimal and safe manner.
SPECIFIC OBJECTIVES
  • Handle the codes, norms, and standards used in the design and construction of piping systems.
  • Mastery of the processes involved in the design of pipes applying ASME standards.
  • Identify the materials used in the manufacture of pipes.
  • Layout and pipe support considerations.
  • Types of flanges, gaskets, and bolts.
  • Functions of valves.
  • Fundamentals of Thermal Flexibility Analysis.  
CONTENT
Session 1:
  • Basic Considerations and Design Criteria for Piping Systems by ASME Standards
  • Objectives
  • Explanatory
  • Introduction
  • Process Plant Piping
  • Design Procedure
  • Process Piping Design Loads
  • Permissible Efforts
  • Metal Materials for Process Plant Pipes and Fittings
  • Oil & Gas Pipeline Pipelines
  • Pipeline Design Procedure
  • Pipeline Design Procedure
  • Design Loads for Oil & Gas Pipelines
  • Permissible Efforts
  • Metal Materials for Oil and Gas Pipeline Pipes and Fittings          
Session 2:
  • Wall Thickness Calculation of Straight Pipes Under Internal Pressure by ASME B31.3
Session 3:
  • Wall Thickness Calculation of Straight Pipes Under Internal Pressure by ASME B31.4
Session 4:
  • Wall Thickness Calculation of Straight Pipes Under Internal Pressure by ASME B31.8
Session 5:
  • Wall Thickness Calculation of Straight Pipes Under External Pressure by ASME B31.3
Session 6:
  • Wall Thickness Calculation of Straight Steel Pipes in Offshore Liquid Piping Systems by ASME B31.4
Session 7:
  • Wall Thickness Calculation of Straight Steel Pipes in Offshore Gas Transmission by ASME B31.8
Session 8:
  • Reinforcement of Branch Connections Welded by ASME B31.3
Session 9:
  • Design Considerations and Pipe Supports
  • Process Plant Piping
  • Piping Layout Considerations
  • Clearances (separations)
  • Considerations for Facilitating Pipe Support
  • Bracket Placement Guides
  • Spacing between supports
      WORKSHOP OF PRESSURE VESSEL DESIGN ACCORDING TO ASME VIII Div 1
      GENERAL OBJECTIVE
      To ensure that participants acquire the necessary competencies for the Mechanical Design of Pressure Vessels.
      SPECIFIC OBJECTIVES
      • Handle the codes, norms, and standards used in the design and construction of  piping systems.
      • Mastery of the processes involved in the design of pipes applying ASME standards.
      • Identify the materials used in the manufacture of pipes.
      • Layout and pipe support considerations.
      • Types of flanges, gaskets, and bolts.
      • Functions of valves.
      • Fundamentals of Thermal Flexibility Analysis.
      CONTENT
      Session 1:
      • Pressure      Vessel Design - Basic Considerations and Design Criteria
          • Types of Vessel
          • Description of the equipment
          • Separators
          • Debuggers
          • Drums (horizontal separators)
          • Columns
          • Reactors
          • Differences between vertical and horizontal vessels
      • Design Criteria
          • Materials [ASME VIII Div 1 UG-4 General]
          • Material Selection
          • Welding Materials [ASME VIII Div 1 UG-9]
          • Bolts & Nuts [ASME VIII Div 1 UG-12]
          • Design [ASME VIII Div 1 UG-16 General]
          • Design Temperature [ASME VIII Div 1 UG-20]
          • Design Pressure [ASME VIII Div 1 UG-21]
          • Loads [ASME VIII Div 1 UG-22]
          • Corrosion [ASME VIII Div 1 UG-25]
          • Specified minimum wall thickness
      Session 2:
      • Pressure vessel design - design from a mechanical point of view
      • Body, Head & Tubes
      • Flanged connections
      • Openings in pressure vessels
      • Thickness of Housings Under Internal Pressure [ASME VIII Div 1 UG-27(c)]
      Session 3:
      • Formed Heads, and Sections, Concave Side Pressure – 2:1 Ellipsoidal Head [ASME VIII Div 1 UG-32(c)]
      • Formulas for the Design of Heads Formed Under Internal Pressure – Ellipsoidal Head [ASME VIII Div 1 app. 1-4(c)]
          Session 9 (continued):
          • Space in laying pipes
          • Loads on Stands, Hangers and Restraints
          • Types of Brackets, Hangers, and Restrictions
          • Recommended Tube Holders & Hangers
          • Oil & Gas Pipelines
          • Piping Layout Considerations
          • Clearances (separations)
          • Brackets & Anchors
          • Backfill for buried pipes
          • Requirements for "shirts" at road and railroad crossings  
          Session 10:
          • Flanges, Gaskets & Bolts
          • Types of Idlers
          • Types of Gaskets (Gaskets)
          • Types of Bolts  
          Session 11:
          • Valves
          • Introduction
          • Valve Specification
          • Functions of Valves
          • Applications
          • Valve seat
          • Valve Selection
          • Type of valves
          • Valve Operator Type
          Session 12:
          • Thermal Flexibility of Pipes by ASME B31.3
          • Introduction
          • Fundamentals of Thermal Flexibility Analysis
          • Purposes of Pipe Flexibility Analysis
          • Temperature for Flexibility Analysis
          • Number of cycles
          • Requirements for Flexibility Analysis
          • Guides for Solving Flexibility Issues
          • Expansion Joints
          INSTRUCTOR: Eng. Leonardo Bavaresco
          ADDRESSED TO: Managers, Leaders, Supervisors and Engineers.
          DURATION: 24 academic hours.
          SESSIONS: 12 Online Sessions of 2 hours twice a week (days to be agreed)
          SCHEDULE: To be arranged
          LANGUAGE: English
          MATERIAL: In www.ingeniare.net
          CERTIFICATION: Issued by Ingeniare
          COST: 140€ + VAT (VAT will only apply to invoices in Spain)
          REGISTRATION & PAYMENT: Communicate with info@ingeniare.net
           
          Session 4:
          • Formed Heads, and Sections, Concave Side Pressure - Torispherical Head [ASME VIII Div 1 UG-32(e)]
          • Formulas for the Design of Heads Formed Under Internal Pressure - Toryspherical Head [ASME VIII Div 1 app. 1-4(d)]
          Session 5:
          • Formed Heads, and Sections, Concave Side Pressure - Hemispherical Head [ASME VIII Div 1 UG-32(e)]
          • Formed Heads, and Sections, Concave Side Pressure - Tapered Head and Sections [ASME VIII Div 1 UG-32(f)]
          Session 6:
          • Rules for conical reducer sections and conical heads under internal pressure- desig of reinforcement [ASME VIII Div 1 app. 1-5(d) y (e)]
          • Formed Heads, and Sections, Concave Side Pressure - Toryconic Head and Sections [ASME VIII Div 1 UG-32(g)]
          Session 7:
          • Thickness of Housings and Tubes Under External Pressure [ASME VIII Div 1 UG-28]
          • Wall thickness of formed heads, pressure on convex side ASME VIII Div 1 UG 33
          Session 8:
          • Pressure Vessel Openings [ASME VIII Div 1 UG-36], Reinforcement Required for Openings in Formed Housings and Heads (ASME VIII Div 1 UG-37) & Nozzle Neck Thickness [ASME VIII Div 1 UG-45]
          INSTRUCTOR: Eng. Leonardo Bavaresco
          ADDRESSED TO: Managers, Leaders, Supervisors and Engineers.
          DURATION: 16 academic hours.
          SESSIONS: 8 Online Sessions of 2 hours twice a week (days to be agreed)
          SCHEDULE: To be arranged
          LANGUAGE: English
          MATERIAL: In www.ingeniare.net
          CERTIFICATION: Issued by Ingeniare
          COST: 80€ + VAT (VAT will only apply to invoices in Spain)
          REGISTRATION & PAYMENT: Communicate with info@ingeniare.net
          Back to content